June 4, 2025

Amazing Crochet booties in jasmine stitch – all sizes

Give tiny feet a touch of charming elegance with these adorable crochet baby booties! Inspired by the lovely pink pair in the picture, this pattern features a cozy textured cuff, a comfortable foot portion, and a delicate satin bow for that extra special touch. These booties are a joy to make and a delightful gift for any little one.

Skill Level: Easy to Intermediate (familiarity with basic stitches, working in rounds, and possibly some basic post stitches for ribbing is helpful).

Materials:

  • Yarn: DK (Light Worsted) weight yarn. A soft baby acrylic, cotton, or blend is highly recommended for comfort.
    • Main Color (MC): Pink (or your chosen primary color) – approx. 40-60 yards per pair.
  • Crochet Hook: Size G/6 (4.0 mm) or size needed to obtain gauge.
  • Yarn Needle: For weaving in ends.
  • Scissors
  • Stitch Markers: Very helpful for marking the start of rounds and increase points on the sole.
  • Small Satin Ribbon: Approx. 1/4 to 1/2 inch wide, 6-8 inches long per bootie (or pre-made small satin bows).

Gauge (Crucial for Sizing!):

Your paragraph text – 4

Achieving the correct sole length is paramount for these booties to fit properly.

  • Sole Gauge: After completing the sole section, measure its length. Adjust your hook size or initial chain/increase rounds to reach the desired length from the sizing chart below.
    • Example: For 0-3 months, your finished sole should measure around 3.5 inches.

Sizing Chart (Approximate Finished Sole Length):

SizeApprox. Sole Length (inches)Approx. Sole Length (cm)Initial Chain (suggested)
0-3 Months3.59Ch 10
3-6 Months410.5Ch 12
6-9 Months4.511.5Ch 14
  • Note: If you want a larger size, increase your initial chain length by 2 stitches per size increment, and you may need to add an extra round to the sole and/or upper sections.

Abbreviations (US Crochet Terms):

  • ch: chain
  • sl st: slip stitch
  • sc: single crochet
  • hdc: half double crochet
  • dc: double crochet
  • sc2tog: single crochet 2 together (decrease)
  • hdc2tog: half double crochet 2 together (decrease)
  • BLO: back loop only
  • FLO: front loop only
  • FPhdc: Front Post Half Double Crochet (see Special Stitches)
  • BPhdc: Back Post Half Double Crochet (see Special Stitches)
  • st(s): stitch(es)
  • sp: space
  • inc: increase (work 2 sts in the same st)
  • MC: Main Color
  • ( ): repeat instructions in parentheses a specified number of times
  • [ ]: total stitches at the end of the round

Special Stitches (for Cuff Ribbing – Optional, can use regular hdc if preferred for simpler look):

  • Front Post Half Double Crochet (FPhdc): YO, insert hook from front to back around the post of the indicated hdc stitch from the previous round, YO, pull up a loop. YO, pull through all 3 loops on hook.
  • Back Post Half Double Crochet (BPhdc): YO, insert hook from back to front around the post of the indicated hdc stitch from the previous round, YO, pull up a loop. YO, pull through all 3 loops on hook.

Video Tutorial


Pattern for Sweet Bow Baby Booties (Make 2)

Part 1: The Sole (Make 2 per pair)

Work in continuous rounds, using a stitch marker to mark the first stitch of each round.

Using Main Color (MC – Pink):

Round 1: Ch (refer to Sizing Chart for initial chain). Hdc in 3rd ch from hook. Hdc in next (initial chain – 3) stitches. In the last ch, work 3 hdc (this turns the corner). Now working down the other side of the chain, hdc in next (initial chain – 3) stitches. In the very last ch (where you worked your first hdc), work 2 hdc. [Total stitches will vary based on initial chain]. Place stitch marker in the first hdc of the next round.

Round 2: 2 hdc in the first st (inc). Hdc in each st along the side of the sole until you reach the 3 hdc you worked in the last chain. (2 hdc in next st) 3 times (inc for the toe end). Hdc in each st along the other side until you reach the 2 hdc at the heel end. (2 hdc in next st) 2 times (inc for the heel end). Move stitch marker to the first st of the current round.

Round 3 (Optional for larger sizes, or if you need a wider sole): (2 hdc in next st) 2 times (inc). Hdc in each st along the side. (2 hdc in next st, hdc in next st) 3 times (inc for the toe end). Hdc in each st along the other side. (2 hdc in next st, hdc in next st) 2 times (inc for the heel end). Move stitch marker to the first st of the current round.

Check your sole length against the Sizing Chart. Adjust hook size or add/remove initial chains/rounds if needed.

High quality

Sl st to the first hdc of your last sole round to join. Fasten off and weave in ends for one sole. For the second sole, do not fasten off; you’ll continue with the upper.

Part 2: Building the Bootie Body

Using Main Color (MC – Pink), continuing from the second sole:

Round 1 (Creating the “Wall”): Ch 1. Sc in the BLO of each st around. Sl st to the first sc to join. This round creates a nice, defined edge that makes the bootie stand up.

Round 2 (Solid Body Round): Ch 2 (counts as hdc). Hdc in each st around. Sl st to the first hdc to join. The image shows a subtle texture, which could be achieved with hdc worked into a specific part of the stitch, or simply by consistent hdc work.

Round 3 (Toe Shaping – First Decrease Round): Ch 2. Hdc in the first (approx. 10-12) stitches (for the heel/instep area; adjust based on your sole size). Mark the center toe stitch. You’ll be working decreases symmetrically around this point. Now, for the toe decreases: (hdc2tog) 5-6 times across the front of the bootie. Hdc in the remaining stitches around the heel/instep. Sl st to the first hdc to join. This round begins to pull the toe inwards.

Round 4 (Further Toe Shaping & Opening): Ch 2. Hdc in the first (approx. 8-10) stitches (slightly fewer as the front has narrowed). (hdc2tog) 3-4 times across the front of the bootie (over the previously decreased section). Hdc in the remaining stitches around the heel/instep. Sl st to the first hdc to join. The opening for the foot should now be well-defined.

Round 5: Ch 2. Hdc in each st around the entire opening of the bootie (including the decreased toe section). Sl st to the first hdc to join. This round creates a smooth transition to the cuff.

Part 3: The Ribbed Cuff

The picture shows a textured, ribbed cuff.

Using Main Color (MC – Pink):

Round 1 (Ribbing): Ch 2 (does not count as st). *FPhdc around next st, BPhdc around next st.* Repeat from * to * around. Sl st to the first FPhdc to join. This round creates the ribbed texture.

Repeat Round 1 of Ribbing for 2-3 more rounds, or until the cuff reaches your desired height. The picture shows a cuff that’s about 1.5 – 2 inches high.

Final Cuff Edge (Optional – for a neat top): Ch 1. Sc in each st around. Sl st to join. Fasten off MC.

Part 4: Finishing

  • Weave in all remaining yarn ends securely.
  • Make sure both booties are as identical as possible.
  • Attach Satin Bows: Take your satin ribbon. For each bootie, cut an approximately 6-8 inch piece. Tie it into a small, neat bow. Use a yarn needle to secure the bow to the side of each bootie (on the cuff, as seen in the picture) with a few stitches, ensuring it’s very securely attached and baby-safe. Alternatively, if using pre-made bows, just sew them on.
  • Optional: For added grip, apply non-slip puffy paint or sew on non-slip pads to the bottom of the soles if the baby will be walking.

Congratulations! You’ve just created a lovely pair of sweet and stylish bow baby booties. These are sure to be a comfortable and adorable addition to any baby’s outfit!

Leave a Reply

Your email address will not be published. Required fields are marked *